What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 02.07.2025 05:46

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This is where the MOV conducts again, and dissipated the energy.

What is lightning?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Have you ever witnessed political correctness harm someone?

The other is “what does a “fuse” do?”

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

At one ohm, the resistor has a maximum of 1 watt power.

Blocking Brain Inflammation Molecule May Halt Alzheimer’s - Neuroscience News

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

but this device (an Inductor) … impedes the rapid changes in the current.

2024–10–10[John johnson John Johnson ]

Image of giant volcano on Mars captured by NASA orbiter - ABC News

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There are two important concepts here.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Have you ever had sex with sisters?

He then describes the function of a fuse.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

The bolt then partially travels down the line to your home.

The World's Largest Organism Is Slowly Being Eaten - ScienceAlert

He then asserts :

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

so, what happens?

What’s Behind PayPal’s Will Ferrell Ads? - WSJ

But… the neutral is now “floating” because of the 1 ohm resistance.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

These devices are installed between the “hot” and “neutral” and protective ground.

What are women's true thoughts and feelings on bestiality?

eight

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Barnstars:

Large Bluetooth speaker with style and power - Marshall Tufton in a practical test - Notebookcheck

a photo is worth a thousand words.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

It also is a device that limits the change in current flow.

Yankees vs Red Sox Predictions, Picks, Odds, Best Bet, Start Time - Action Network

First Sentence:

There are three different concepts here that are getting confused.

The third is lightning and “how it gets conducted into a home.”

What is a good moisturizer and sunscreen for oily skin for a girl like me who is 17?

One

What does a fuse do?

This one hit behind the barn.

Why is Fourth Wing so popular? What makes it stand out from other romantasy books? (No spoilers please)

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Here is a simplified AC power diagram.

I post the exact comment here.

3 Economic Events That Could Affect Your Portfolio This Week, June 16-20, 2025 - TipRanks

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is 'the assistant's answer'

Edit 2024–10.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

In schematic diagrams this is the symbol for a fuse:

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

For this case there are devices called Metal oxide varistors (MOV).

But it can get overloaded, and no longer works.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

He then describes Rainy Season and Lightning.

(Dc diagram shown, AC is similar).

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

[image of Common-mode choke]

Because the load is inductive, the current lags the voltage.(by a bit).

One is “what exactly is in a ‘surge protector’ ? ”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

what exactly is a ‘surge’ protector?

It seems Mohan does not understand the difference between a comment and an Answer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

but I think this circuit , shows a few more pieces.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is where this question deviates from being a 'generic' question, and becomes more specific.

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This device then solves the entire problem.

These are simplified answers to the original question, and does not change anything I wrote above.

At least they know the answer if they wanted it.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

the problem then depends on "how fast does the fuse operate?".

2024–10–14 [Omar Gharbi Omar Gharbi ]

A circuit breaker is similar, but is resettable.

2024–10–16 [ OO OLAOYE OYEBODE ]

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

A fuse is a non-resetable over current circuit protector.

Upvotes:

Now when you have a certain ac resistance, then a current flows in a loop.

So, the voltage could go up to 500 volts, and the fuse will not open up.

An AC voltage/ current source, and an ac inductive load.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

[old diagram got deleted by accident]

nine